Aluminium Windows in Dubai

A window is not just an opening filled with glass.

Stand inside the room and look toward it.

How much natural light do you want?

Does the window need to open for ventilation?

Is the outside view important?

Would part of the opening work better as fixed glass?

Are you replacing an old aluminium window, or planning windows for a completely new property?

These questions should come before fabrication.

IST Works L.L.C provides custom frameless glass partition windows in Dubai for villas, apartments, offices and suitable commercial properties. Window configurations can be planned around the actual opening, intended use and project requirements.

Opening → Light → Ventilation → Window Type → Aluminium Frame → Glass → Measurement → Fabrication → Installation

Custom Aluminium Window Price

Request a Quote Based on Your Window Requirements

Pricing depends on dimensions, window configuration, aluminium system, glass specification, finish, hardware, quantity and site conditions.

First Question: Does the Window Need to Open?

This sounds obvious, but it immediately changes the project.

Some windows primarily need to bring natural light into a space and provide a view.

Others also need to open.

And some larger openings may work with a combination of fixed and opening sections.

So before choosing the appearance of the aluminium frame, decide what you expect the window to do.

If ventilation is important

An opening window configuration should be considered.

If the view and natural light are the priority

A fixed glass section may be suitable.

If you want both

A combination of fixed and opening sections may be considered depending on the opening and project.

There is no reason every section of a large window has to perform exactly the same function.

Aluminium Sliding Windows

Sliding aluminium windows are a familiar choice for many Dubai properties.

Instead of opening into or out of the room, the moving panel travels horizontally within the window system.

This can be useful where you want an opening window without requiring the same type of clearance associated with a conventional hinged opening.

Suitable applications can include:

  • Apartments
  • Villas
  • Kitchens
  • Rooms
  • Offices
  • Commercial properties
  • Replacement window projects

The exact configuration depends on the dimensions and intended opening arrangement.

Is a sliding window right for your opening?

Send us a photograph from inside the room.

Include the complete opening rather than only a close-up of the existing frame.

[Ask About Aluminium Sliding Windows]

Fixed Aluminium Windows

Not every window needs to move.

A fixed aluminium window can be considered where the purpose is primarily to provide glazing, natural light or a view without an opening section.

Fixed sections can also form part of a larger aluminium window arrangement.

For example, a wider opening may potentially combine:

Fixed Glass + Opening Section

or another suitable configuration depending on the project.

The advantage of custom fabrication is that the window arrangement can be planned around the actual opening rather than treating every opening as a standard-size unit.

Fixed + Opening Window Combinations

Large openings often create more choices.

Imagine a wide wall opening.

You may not need every section to open.

Instead, a design might use larger fixed areas for the view and selected opening sections where ventilation is required.

This can help balance:

natural light

view

ventilation

operation

frame layout

The appropriate configuration depends on the project dimensions and intended use.

For larger openings, send a wide photograph or architectural elevation so the complete window can be considered.

Aluminium Glass Windows

Glass and aluminium perform different roles within the window system.

The aluminium creates the frame and operating structure, while the selected glass forms the glazed area.

The glass requirement should be considered according to where and how the window will be used.

Relevant questions include:

Is the window internal or external?

Is privacy important?

How large is the glazed area?

Is the section fixed or opening?

Are there project-specific glass requirements?

For architectural or commercial work, include the specified glass requirements when requesting a quotation.

Natural Light: Think Beyond Window Size

A larger window can allow a larger glazed area, but window planning is not simply a competition to make every opening as large as possible.

Consider what is outside the window.

Is there a useful view?

Does the opening face another building?

Is privacy important?

Where is the window positioned relative to the room?

How does it relate to the furniture?

A well-planned window should respond to the room around it.

For a renovation, stand back and photograph the entire wall.

That gives much more context than photographing only the aluminium frame.

Ventilation Changes the Window Design

If the window needs to provide ventilation, tell us from the beginning.

This affects the configuration.

A customer might initially say:

“I need a large aluminium window.”

But the more useful requirement is:

“I need a large aluminium window, but I want part of it to open for ventilation.”

Now the function is clearer.

For rooms where opening windows are required, we can consider the suitable configuration based on the actual opening and project requirements.

Aluminium Windows for Villas in Dubai

A villa may contain many different window sizes and functions.

The living room might have a large glazed opening.

Bedrooms may require opening windows.

A kitchen may have a completely different arrangement.

Other areas may need smaller or fixed windows.

Instead of assuming one design should be repeated everywhere, consider each opening according to the room.

A villa window schedule could look like:

Area Requirement Approx. Size
Living Room Large glazed window Project measurement
Master Bedroom Opening window Project measurement
Kitchen Sliding/opening window Project measurement
Stair Area Fixed window Project measurement

For multiple windows, send the complete schedule where possible.

This makes the project easier to assess and quote.

Aluminium Windows for Apartments

Apartment window work is often different from a new villa project because the building already has established openings and exterior design conditions.

For a replacement enquiry, send photographs showing:

the existing window

complete frame

inside view

outside-facing arrangement where safely possible

surrounding wall

approximate dimensions

Also tell us what you want to change.

Is the existing window damaged?

Do you want the same configuration replaced?

Are you considering a different opening arrangement?

The existing conditions need to be reviewed before confirming what changes are appropriate.

For apartment or managed-building work, relevant building or property-management requirements may also need to be considered before alterations are undertaken.

Aluminium Windows for Offices

Office windows can be required as part of a new fit-out, renovation or existing aluminium-and-glass system.

Depending on the project, requirements may include:

  • Fixed aluminium glass windows
  • Opening sections
  • Internal glazed sections
  • Windows associated with aluminium partitions
  • Replacement aluminium frames
  • Custom commercial glazing

For an office fit-out, send drawings if available.

For an existing office, send photographs and approximate dimensions.

Aluminium Windows for Commercial Properties

Commercial projects may involve multiple window types and quantities.

Instead of sending twenty photographs without identification, create a simple reference system.

For example:

01 — Reception — Qty 2

02 — Office Area — Qty 6

03 — Meeting Room — Qty 3

04 — Other Area — Qty 4

Then attach the corresponding dimensions, photographs or drawings.

For contractors, a window schedule or relevant architectural elevation is particularly useful.

Large Aluminium Windows

Large glazed openings can have a major influence on the appearance of a room.

But a larger opening also means the configuration needs to be considered carefully.

Questions include:

Should everything be fixed?

Which sections need to open?

Where should the frame divisions appear?

What glass is required?

How does the window relate to the building design?

For large custom windows, an elevation or clear wide-angle site photograph is helpful during the initial discussion.

Project-specific structural and technical requirements should be confirmed according to the actual application.

Clear Glass Aluminium Windows

Clear glass is a natural option where visibility and natural light are important.

It can suit many residential and commercial applications, subject to the appropriate project specification.

However, clear glass isn’t automatically right for every opening.

A window facing a private internal area, neighbouring property or privacy-sensitive room may need a different approach.

Tell us how the space is used before finalizing the glass requirement.

Privacy Glass Options

Some windows need natural light without the same level of direct visibility.

For suitable applications, privacy-oriented glass or treatments may be considered according to the project requirement.

This can be useful for certain:

  • Bathrooms
  • Offices
  • Commercial spaces
  • Privacy-sensitive areas

Rather than choosing based only on appearance, tell us the purpose of the room and the level of privacy you are trying to achieve.

Aluminium Window Frames

The frame affects more than the appearance of the window.

It forms part of the complete window system.

The selected aluminium system needs to work with:

opening dimensions

window configuration

glass

hardware

operating sections

installation conditions

This is why we assess the complete window rather than quoting only “aluminium per metre” without understanding the application.

Aluminium Window Finishes

The aluminium finish should work with the architecture and surrounding interior or exterior elements.

For a new project, the designer or contractor may already have a finish requirement.

For replacement work, you may want the new aluminium to coordinate with existing doors, windows or other building elements.

Send a photograph showing the surrounding aluminium work where matching or visual coordination is important.

Available finish options should be confirmed according to the selected system and project requirement rather than assumed universally.

Window Hardware Is Part of the System

Opening windows depend on the components that allow them to move, guide, close or secure appropriately.

The relevant hardware depends on the window configuration.

A sliding window does not use the same operating arrangement as every other type of window.

For that reason, hardware should be considered together with:

window dimensions + configuration + aluminium system + glass + intended usage.

For commercial projects with specified hardware requirements, include those details in the enquiry.

Replacing Old Aluminium Windows

Sometimes the easiest way to explain a replacement project is with three photographs.

1 — The Whole Window

Stand back and show the complete opening.

2 — The Problem

Show the damaged, worn or problematic area.

3 — The Surrounding Wall

Show how the window relates to the property.

Then tell us:

“I want the same type replaced.”

or

“I want to change the window configuration.”

Those are different projects.

If you want a different configuration, it should be assessed against the existing opening and relevant property conditions before fabrication.

Can I Replace Only Part of My Existing Window?

Possibly in some situations, but it depends on the existing aluminium system and its condition.

For example, a customer may ask whether one moving section can be changed while keeping everything else.

That cannot be determined reliably from overall dimensions alone.

The existing frame, components and compatibility need to be assessed.

If the existing system is unsuitable for partial work, a broader replacement may be required.

Send detailed photographs before assuming the whole window must be removed—or that everything can be reused.

Can an Existing Aluminium Frame Be Reused?

This is another project-specific question.

An existing frame may look acceptable from a distance but still need assessment for compatibility with the proposed work.

Before promising reuse, we need to understand:

  • Existing frame condition
  • Existing system
  • New window requirement
  • Dimensions
  • Glass requirement
  • Operating configuration
  • Compatibility

If you are trying to reduce the project cost by retaining existing components, tell us.

We can assess the requirement rather than automatically assuming either reuse or complete replacement.

When a Window Is Difficult to Open

A window that is difficult to move doesn’t automatically mean you need a completely new window.

The problem might involve the operating system, alignment, hardware or another part of the existing installation.

Start by describing the actual symptom.

For example:

“sliding panel is difficult to move.”

“window does not close properly.”

“Part of the aluminium is damaged.”

“The glass is damaged.”

“We want to replace the complete old window.”

Photographs and a clear description help determine whether the requirement is repair-related or a complete replacement project.

Renovating? Don’t Measure Too Early

Renovation projects change.

Walls are adjusted.

Tiles are added.

Finishes change.

Floor levels can change.

Openings may be modified.

If a custom aluminium window is being prepared for an opening that is still changing, final fabrication measurements should correspond with the appropriate completed site conditions.

Approximate dimensions are useful for early budgeting.

They should not automatically be treated as final fabrication dimensions.

Aluminium Windows for New Construction

For a new project, the initial window requirement may come from architectural drawings rather than an existing physical opening.

Useful information includes:

  • Window schedule
  • Architectural elevations
  • Floor plans
  • Opening dimensions
  • Window references
  • Glass requirements
  • Finish requirements
  • Quantity
  • Project location
  • Relevant specifications

Where project drawings and actual site conditions differ, the relevant dimensions and requirements should be resolved before fabrication.

Working With Contractors & Interior Designers

For contractors, consultants and designers, the most efficient enquiry is usually a structured one.

Instead of:

“Please give aluminium window price.”

Send:

“Please quote the attached W01–W12 window schedule and elevations for our Dubai project.”

Include the available:

dimensions

quantities

window configurations

glass specifications

finish requirements

relevant hardware requirements

drawings

project location

Clear information makes scope comparison much easier.

How Much Do Aluminium Windows Cost in Dubai?

There is no confirmed one-price-fits-all rate we can responsibly publish for every aluminium window.

Custom Aluminium Window Price

Request a Quote

The final price can depend on:

  • Width and height
  • Total quantity
  • Aluminium system
  • Sliding, fixed or other opening configuration
  • Number of sections
  • Glass specification
  • Aluminium finish
  • Hardware
  • Existing site conditions
  • New installation or replacement
  • Access
  • Installation requirements
  • Overall project complexity

For this reason, IST Works quotes aluminium windows according to the actual requirement.

Why Two Same-Size Windows Can Cost Differently

Imagine two openings.

Both measure approximately:

1.5 m × 1.5 m

Window A

A straightforward fixed aluminium glass window.

Window B

A window with opening sections, operating hardware and a different project specification.

Same overall area.

This is why square metres alone don’t tell us the complete aluminium window price.

What Should I Send for a Window Quote?

You don’t need professional drawings for a straightforward residential enquiry.

Start with:

1. Window Photo

Show the complete opening.

2. Approximate Dimensions

Width × Height

3. Window Requirement

Sliding / Fixed / Opening / Not sure

4. Glass Requirement

Tell us if you already have a preference.

5. Quantity

How many windows?

6. Project Location

Building, community or project location in Dubai.

7. New or Replacement?

This tells us whether existing conditions need to be considered.

If you have a reference image, send that too.

[Send My Window Details on WhatsApp]

How to Measure for an Initial Aluminium Window Quote

For preliminary pricing, measure the approximate:

Width

and

Height

of the relevant opening.

Then photograph the complete area.

Do not worry about trying to provide fabrication-level measurements yourself.

Custom fabrication should be based on the relevant confirmed measurements for the actual project.

For multiple windows, label them.

For example:

W1 — 1200 × 1500 mm

W2 — 1800 × 1500 mm

W3 — 900 × 1200 mm

Then match the photographs to those labels.

This can save a lot of confusion.

Our Aluminium Window Supply & Installation Process

01 — Tell Us What the Room Needs

Natural light, ventilation, view, privacy, replacement—or a combination.

02 — Show Us the Opening

Send photographs and approximate dimensions.

03 — Select the Configuration

Sliding, fixed or another suitable opening arrangement is considered according to the project.

04 — Define the Specification

Aluminium, glass, finish and relevant hardware requirements are established.

05 — Prepare the Quotation

Pricing is based on the actual window scope.

06 — Confirm Measurements

Relevant final measurements are confirmed before custom fabrication.

07 — Fabrication

The aluminium window is prepared according to the confirmed project requirements.

08 — Installation

The window is installed according to the agreed scope and site conditions.

09 — Operation Check

Relevant opening sections are checked for appropriate movement and alignment as part of the installation.

10 — Final Review

The completed work is reviewed against the agreed scope.

Five Things to Decide Before Ordering Aluminium Windows

Light

How much glazing do you want?

Ventilation

Does the window need to open?

View

Are you trying to preserve a larger visual opening?

Privacy

Does the room need reduced visibility?

Movement

How should the opening section operate?

You don’t need to know the technical answer to every question.

You simply need to tell us what you want the room to do.

The window configuration can then be discussed around those requirements.

Common Mistakes When Ordering Aluminium Windows

Choosing From a Photo Without Checking the Opening

A reference photo shows the design you like, not whether it fits your property.

Assuming Every Section Should Open

Some larger windows may benefit from combining fixed and opening areas.

Measuring Only the Existing Moving Panel

For replacement projects, the complete existing window system matters.

Ignoring the Room

Furniture, privacy, ventilation and view can influence the best configuration.

Assuming an Existing Frame Can Always Be Reused

Compatibility and condition should be assessed.

Giving Only Square Metres for a Commercial Quote

Configuration, glass, aluminium, hardware and quantity all matter.

Fabricating From Early Renovation Measurements

If the opening is still changing, relevant final dimensions need to be confirmed at the appropriate stage.

Aluminium Windows and Aluminium Doors

Windows and doors are often required together.

A villa renovation may include:

aluminium sliding doors + aluminium windows

An office project may include:

aluminium glass doors + fixed glazed sections

A larger property may need several coordinated aluminium elements.

If your project includes both doors and windows, send the complete scope rather than requesting them separately.

This makes it easier to understand the overall design and requirements.

Why Choose IST Works for Aluminium Windows in Dubai?

IST Works L.L.C provides aluminium, glass and mirror contracting solutions for residential and commercial projects across Dubai.

Custom-Made Requirements

Window solutions can be prepared according to confirmed project dimensions rather than relying only on standard sizes.

Sliding & Fixed Options

Different window configurations can be considered according to the opening and intended use.

Aluminium & Glass Coordination

The aluminium frame and appropriate glass requirement can be considered as one complete window system.

Residential Projects

Suitable aluminium window work can be provided for villas, apartments and renovation projects.

Commercial Projects

Contractors and businesses can submit window schedules, drawings and specifications for suitable commercial requirements.

Measurement & Installation

The service can cover relevant measurement, preparation and installation according to the agreed project scope.

Dubai-Based Operations

IST Works operates in Dubai with its head office in Business Bay and warehouse operations in Al Qusais Industrial Area 4.

Aluminium Window Installation Across Dubai

IST Works handles suitable aluminium window projects across Dubai, including Business Bay, Downtown Dubai, Dubai Marina, JLT, Jumeirah, Palm Jumeirah, Al Barsha, Dubai Hills, JVC, Arabian Ranches, Mirdif, Al Quoz, Al Qusais and other Dubai communities.

apartment projects, send your building and location.

villas, send your community.

ata-start=”23130″ data-end=”23217″>commercial projects, provide the project location, quantity and available drawings.

-start=”23219″ data-end=”23222″ />

Aluminium Windows Dubai – Frequently Asked Questions

Do you supply and install aluminium windows in Dubai?

Yes. IST Works provides custom aluminium window solutions for suitable residential and commercial projects across Dubai.

Do you provide aluminium sliding windows?

Yes. Sliding window configurations can be considered according to the opening and project requirements.

Do you install fixed aluminium windows?

Yes. Fixed aluminium glass sections can be considered where an opening section is not required.

Can fixed and opening windows be combined?

Depending on the project, a larger window arrangement may include both fixed and opening sections.

Can you make aluminium windows to custom sizes?

Yes. Custom aluminium windows can be prepared according to confirmed project measurements and the selected system.

Do you replace old aluminium windows?

Suitable replacement projects can be assessed. Send photographs of the complete existing window, frame and surrounding opening.

Can you reuse my existing aluminium frame?

Possibly in some cases, but the existing system, condition and compatibility need to be assessed before reuse can be confirmed.

Do you provide aluminium windows for villas?

Yes. Suitable custom window requirements can be handled for villas, including new installations, renovations and replacements.

Can you replace apartment windows?

Potentially, depending on the project and relevant property or building requirements. Send the existing window details for assessment.

Do you provide office and commercial aluminium windows?

Yes. Suitable aluminium and glass window requirements can be handled for offices, fit-outs and commercial projects.

Can contractors send window schedules?

Yes. Contractors can provide schedules, drawings, elevations, quantities and specifications for quotation.

Which is better: fixed or sliding aluminium windows?

They serve different purposes. Fixed windows do not provide an opening section, while sliding windows allow horizontal opening. The right choice depends on whether ventilation and opening access are required.

Can I use privacy glass in an aluminium window?

Privacy-oriented glass options may be considered for suitable applications. The appropriate specification depends on the project.

How much do aluminium windows cost in Dubai?

Pricing depends on dimensions, aluminium system, configuration, glass, finish, hardware, quantity and installation conditions. A custom quotation is recommended.

What do you need to give me a quote?

Send a window photograph, approximate width × height, quantity, preferred configuration, project location and whether the project is new or replacement work.

“Villa in Arabian Ranches. We have four existing aluminium windows to replace. We want opening windows for ventilation. Approximate dimensions and photos are attached.”

For a new project:

“New villa in Dubai Hills. Please quote the aluminium windows shown in the attached window schedule and elevations.”

Now we can understand not only the size of the glass—

but what you need the window to do.

Get an Aluminium Window Quote in Dubai

Custom Aluminium Window Pricing

Based on Your Opening, Configuration & Project Requirements

Whether you need one replacement window, custom sliding windows for a villa or multiple aluminium windows for a commercial project, send IST Works your photographs, dimensions or drawings for an initial assessment.

Call: +971 4 564 5719
WhatsApp: +971 54 308 5166

Head Office: Churchill Executive Tower, 19th Floor – 1908, Business Bay, Dubai

Warehouse: Al Qusais Industrial Area 4, Dubai